Please carefully confirm MUST company name and account before making payment to avoid any loss ! DETAILS x

PC1800A Series MPPT Solar Charge Controller (60A/80A) PC1800A Series MPPT Solar Charge Controller (60A/80A) PC1800A Series MPPT Solar Charge Controller (60A/80A)

MPPT Solar Charge Controller

PC1800A Series 60/80A (MPPT)

MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging.

  • LCD display , easy to operate on LCD screen
  • Multi stage charging (3-stage charging , parallel charging and equalized charging function)
  • BTS – Battery remote temperature sensor terminal
  • Enable to charge Li-thium, Gel , lead-acid battery
  • With RS485 & USB communication port
  • Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
Where to Buy?


RS485/USB Communication

The default communication of the controller is RS485 port.You can use supplied cable to connect RS485,USB port of controller to PC.It can be used for monitoring or upgrade the firmware in short distance.

Equalize stage charging function

Equalization function reverses the buildup of negative chemical effects like stratification,a condition where acid concentration is greater at the bottom of the battery than at the top.Equalization also helps to remove sulfate crystals that might have built up on the plates.

Battery reverse protection

There’s a battery reverse protection function in the board, then the controller will be perfectly protected even installer or user connect the battery in reverse pole accidentally



PC1800A solar inverter system ,it can work with inverter , battery and solar panel , as a complete solar system and back up power for normal home power demands , which take use of sunshine free and save lots of electricity bill for you . This kind of solar inverter systems are widely used in home ,farm ,school,shops etc .




Model 60A 80A
Electrical Specifications
Nominal System Voltage 12V,24V,48V(Auto Detection);36V(Setting)
Maximum Battery Current 60Amps 80Amps
Battery Voltage 12V 24V 36V 48V
Max PV Input Power(12V) 300W 450W 600W
Max PV Input Power(24V) 600W 900W 1200W
Absorption Voltage 12.5VDC/25.0 VDC
Refloat Voltage 13.7VDC/27.4 VDC
Maximum Solar INput Voltage 100V 145V
PV Array MPPT Voltage Range 15~95V 30~130V 45~130V 60~130V
Maximum Input Power 12 Volt-940W
24 Volt-1880W
36 Volt-2820W
48 Volt-3760W
12 Volt-1250W
24 Volt-2500W
36 Volt-3750W
48 Volt-5000W
Protections Solar high voltage disconnect
Solar high voltage reconnect
Battery high voltage disconnect
Battery high voltage reconnect
High temperature disconnect
High temperature reconnect
Battery Charging
Charging Algorithm 3-Step or 4-Step(LI)
Charging stages Bulk,Absorption,Float
Temperature compensation coefficient -5mV/℃/cell(25℃ ref.)
Temperature compensation range 0℃ to +50℃
Temperature compensation set points Absorption,Float
Charging set points Absorption Stage Float Stage
Flooded Battery 14.2V/28.4V/42.6V/56.8V 13.7V/27.4V/41.1V/54.8V
AGM / GEL / LEAD battery(Default) 14.4V/28.8V/43.2V/57.6V 13.7V/27.4V/41.1V/54.8V
Over-charging voltage 15.5V/30.0V/45.0V/60.0V
Over-charging comeback voltage 14.5V/29.5V/44.5V/59.0V
Battery defect voltage 10.0V/17.0V/25.5V/34.0V
Mechanical and Environment
Product size(W*H*D,mm) 315*160*135
Product weight(kg) 4.7kg
Ambient Temperature Range -10℃ to 55℃
Storage Temperature -40℃ to 75℃
Humidity 0%-90% RH(No condensing)
Enclosure IP20

*Products specifications are subject to change without further notice

Software and Instruction Manual Downloads>>>


We'd Love to Hear From You