Россия
MPPT Solar Charge Controller
PC1600A Series 20/30/40A (MPPT)
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging.
Features:
- LCD display, easy to operate on LCD screen
- Multi stage charging
- With RS485 Communication network terminal (Use for computer to monitor controller working situation）
- BTS function – Battery remote temperature sensor terminal
- Enable to charge Li-thium, Gel , lead-acid battery
- Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
- DSP processors architecture ensures high speed and performance
- DC load support and multi protection
Three Colors Option:
Silver
Red
Blue
Overview
RS485 Communication
The default communication of the controller is RS485 port.You can use supplied cable to connect RS485 port of controller to PC.It can be used for monitoring orupgrade the firmware in short distance.
Multi stage charging
The charge controller is a sophisticated , multi-stage battery charger that uses several regulation stages to allow fast recharging of the battery system while ensuring a long battery life
DC load support
DC load can be connected, the max output current for DC load is 20Amp and DC load input voltage should be coincident with battery voltage.
Battery reverse protection
There’s a battery reverse protection function in the board, then the controller will be perfectly protected even installer or user connect the battery in reverse pole accidentally
PRODUCT DETAILS
INVERTER SYSTEM CONNECTION
APPLICABLE PLACE
ACTUAL CASE
Specification
| Model | PC16-2015A | PC16-3015A | PC16-4015A | |
|---|---|---|---|---|
| Nominal Battery System Voltage | 12VDC/24VDC (Auto Detection) | |||
| CONTROLLER INPUT | ||||
| PV Open Circuit Voltage | 100VDC@12V/ 145VDC @24V | |||
| PV Array MPPT Voltage Range | 16VDC~100VDC / 32VDC~130VDC | |||
| Max PV Input Power(12V) | 300W | 450W | 600W | |
| Max PV Input Power(24V) | 600W | 900W | 1200W | |
| BATTERY | ||||
| Absorption Voltage | 12.5VDC/25.0 VDC | |||
| Refloat Voltage | 13.7VDC/27.4 VDC | |||
| Float Voltage | 14.3VDC/28.6 VDC | |||
| Low Voltage Protection Point | 10.0VDC/20.0 VDC | |||
| DC OUTPUT | ||||
| Output Voltage | 10.0~14.5VDC /20.0~29.0VDC | |||
| Peak Conversion efficiency | 98% (MPPT Efficiency 99%) | |||
| Max Charging Current | 20 amps continuous | 30 amps continuous | 40 amps continuous | |
| Max Output Current | 20 amps continuous | 20 amps continuous | 20 amps continuous | |
| Low voltage alarm | 10.25VDC/20.5 VDC | |||
| Low voltage cut off | 10.0VDC/20.0 VDC | |||
| Low voltage recovery | 11.0VDC/22.0 VDC | |||
| GENERAL SPECIFICATION | ||||
| Radiating mode | Automatic cooling | |||
| DISPLAY & PROTECTION | ||||
| LED indication | Systematic operation, LV indication, LV protection, over charge protection, loads protection, short circuit protection | |||
| LCD display | Charge voltage, charge current, voltage of storage battery, capacity of storage battery, output current | |||
| Alarm Protections | PV array short circuit, PV reverse polarity;Battery reverse polarity, Over charging protection;Output short circuit protection;Low voltage protection for storage battery; | |||
| MECHANICAL SPECIFICATIONS | ||||
| Mounting | Wall mount | |||
| Machine Dimension(W*H* D) | 154*236*88mm` | |||
| Gross Wight(kg)(per pcs) | 2.5Kg | |||
| Packge Dimension(W*H*D) | 610*308*230mm (4PCS/Carton) | |||
| Gross Weight(Kg)(per carton) | 10.8Kg | 13.4Kg | 13.4Kg | |
| OTHER | ||||
| Environmental Rating | Indoor | |||
| Operation Temperature Range | -25~+55°C | |||
| Ambient humidity | 0~90% relative humidity(non-condensing) | |||
| Altitude | ≤3000m | |||
| Loading(20GP/40GP/40HQ) | 2500pcs / 5000pcs / 5800pcs | |||
*Products specifications are subject to change without further notice
