Lithium Iron Phosphate Battery LP16-2450 (25.6V/50Ah) Lithium Iron Phosphate Battery LP16-2450 (25.6V/50Ah)

Lithium Iron Phosphate Battery

LP16-2450 (25.6V/50Ah)

MUST LP1600 wall mounted Lithium battery is with a ground-breaking LiFePO4 battery packsolutions are highly integrated, deep cycle backuppower solutions for your solar home energy storage system. With rich experience and advanced techniques, the product has the features of thefashionable design, high energy, high power density, long service life, and easiness of installation.

  • Wall Mounted LiFePO4 Battery;
  • Easy installation and maintenance;
  • High-quality lithium battery;
  • Compact size, lightweight;
  • Intelligent Battery Management System;
  • High Quality Battery Cell Provides Long Operating Life.
Where to Buy?



Lithium Iron Phosphate can be used in most applications that use Lead Acid, GEL or AGM type batteries.

Suitable applications include:

•Solar Storage
•Switching applications and more
•Base transceiver station
•Communication equipments
•Central office
•Telecommunication systems
•Electronic cash registers
•Microprocessor based office machine


High cycle life

6000 Cycles (25℃, 80% DOD) for effectively lower total of ownership cost

Longer service life

Low maintenance batteries with stable chemistry.

Built in circuit protection

Battery Management System (BMS) is incorporated against abuse.

Better storage

Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation.

Quickly recharge

Save time and increase productivity with less down time thanks to superior charge/discharge efficiency.

Extreme heat tolerance

Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60°C.


Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent.


•Do NOT short circuit, reverse polarity, crush or disassemble.
•Do NOT heat or incinerate.
•Do NOT immerse in any liquid.
•Store at 30~50% SOC. Recharging every 3 months is recommended. The storage area should be clean, cool, dry and ventilated.

↓↓↓Installation Portfolio------------

MODEL LP16-2450
Nominal Voltage 25.6V
Nominal Capacity 50Ah
Nominal energy 1280Wh
Life Cycles 6000 Cycles (25℃, 80% DOD)
Recommended Charge Voltage 29.2V
Recommended Charge Current 10A
End Of Discharge Voltage 22V
Standard Method Charge 10A
Discharge 25A
Maximum Continuous Current Charge 50A
Discharge 50A
BMS Cut-Off Voltage Charge 29.2 V (3.65V/Cell)
Discharge 22.0V (2s) (2.75V/Cell)
Temperature Charge -4 ~ 113 ℉ (0 ~ 45℃ )
Discharge -4 ~ 131 ℉ (-20 ~ 55 ℃ )
Storage Temperature 23~95 ℉ (-5~35℃ )
Shipment voltage ≥25.6V
Module Parallel Up to 15 units
Communication CAN2.0/RS232/RS485
Case Material SPPC
Dimension (L x W x H) 340 x 400 x 140
13.4x 19.3 x 8.3”
Approx. Weight 30.4lbs (13.8kg)
Charge Retention And Capacity Recovery Capability Standard charge the battery, and then put aside at room temperature for 28d or 55 ℃ for 7d, Charge retention rate≥90%, Recovery rate of charge≥90

We'd Love to Hear From You