Lithium Iron Phosphate Battery LP16-24250 (25.6V/250Ah) Lithium Iron Phosphate Battery LP16-24250 (25.6V/250Ah) Lithium Iron Phosphate Battery LP16-24250 (25.6V/250Ah)

Lithium Iron Phosphate Battery

LP16-24250 (25.6V/250Ah)

MUST LP1600 wall mounted Lithium battery is with a ground-breaking BYD LiFePO4 battery packsolutions are highly integrated, deep cycle backuppower solutions for your solar home energy storage system. With rich experience and advanced techniques, the product has the features of thefashionable design, high energy, high power density, long service life, and easiness of installation.

Features:
  • Wall Mounted LiFePO4 Battery;
  • Easy installation and maintenance;
  • High-quality lithium battery;
  • Compact size, lightweight;
  • Intelligent Battery Management System;
  • High Quality Battery Cell Provides Long Operating Life.
Where to Buy?

Overview

APPLICATIONS

Lithium Iron Phosphate can be used in most applications that use Lead Acid, GEL or AGM type batteries.

Suitable applications include:

•Solar Storage
•Switching applications and more
•Base transceiver station
•Communication equipments
•Central office
•Telecommunication systems
•Electronic cash registers
•Microprocessor based office machine
•UPS

FEATURES & BENEFITS

High cycle life

4000 cycles @80% DoD for effectively lower total of ownership cost

Longer service life

Low maintenance batteries with stable chemistry.

Built in circuit protection

Battery Management System (BMS) is incorporated against abuse.

Better storage

Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation.

Quickly recharge

Save time and increase productivity with less down time thanks to superior charge/discharge efficiency.

Extreme heat tolerance

Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60°C.

Lightweight

Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent.

CAUTIONS

•Do NOT short circuit, reverse polarity, crush or disassemble.
•Do NOT heat or incinerate.
•Do NOT immerse in any liquid.
•Store at 30~50% SOC. Recharging every 3 months is recommended. The storage area should be clean, cool, dry and ventilated.

↓↓↓Installation Portfolio------------

MUSTENERGY
MODEL LP16-24250
Nominal voltage 25.6V
Nominal Capacity 250Ah
Nominal energy 6400Wh
Life Cycles 4000+ (80% DoD for effectively lower total of ownership cost)
Recommended Charge Voltage 29.2V
Recommended Charge Current 0.2C(50A)
End of discharge voltage 22.0V
Standard method Charge 100.0A
Maximum continuous current Discharge 100.0A
BMS Cut-Off Voltage Charge <29.2 V (3.65V/Cell)
Discharge >40.0V (2.5V/Cell)
Temperature Charge -4 ~ 113 ℉ (0 ~ 45℃ )
Discharge -4 ~ 131 ℉ (-20 ~ 55 ℃ )
Storage Temperature 23~95 ℉ (-5~35℃ )
Shipment voltage ≥25.6V
Module Parallel non
Communication CAN2.0/RS232/RS485
Case Material SPPC
Dimension (L x W x H) 678 x 466 x 224mm
26.7 x 18.3 x 8.8”
Approx. Weight 187.39lbs (85kg)
Charge retention and capacity recovery capability Standard charge the battery, and then put aside at room temperature for 28d or 55 ℃ for 7d, Charge retention rate≥90%, Recovery rate of charge≥90

We'd Love to Hear From You

    *required
    *required
    *required
    *required